User Manual
Page 29 of 44
LAN Configuration
The LAN Configuration page allows you to specify a device IP address and
Device subnet mask that your WL559E will use.
Note: Change the IP Address (e.g. 10.0.10.251) in this field if you are using two
WL559Es on the same network in order to avoid the occurrence of IP address
conflict. Do take note that the IP Address in this field would also be the one
you would be using in accessing the Web User Interface of your WL559E.
Configuration Settings
The configuration settings page allows you to backup WL559E settings, do a
firmware upgrade, and restore an existing configuration by using the backed
up file.
To Next Page
Loading...
