User Manual
Page 34 of 44
WPS
WPS or Wifi Protected Setup makes it easier for you to connect your WL559E
to your wireless router and the WL559E to your wireless devices with a simple
push of a button.
To connect the WL559E to a Wireless Router via WPS:
1. Press the WPS button of WL559E for 5 seconds.
2. Press the WPS button on your router for 2 seconds.
To connect the WL559E to a Wireless client via WPS:
1. Press the WPS button of WL559E for 2 seconds.
2. Press the WPS button on the wireless client for 2 seconds.
NOTE: To accomplish a successful connection through WPS, simply
accomplish the process correctly within two minutes. It is also important to
ensure that the WPS feature of the device is enabled and must also be
supported on the wireless router and even the wireless devices that will be
connected to your WL559E.
To Next Page
Loading...
