User Manual
Page 24 of 44
Security Settings
The Wireless Security Settings page allows you to change the Security Mode,
enable or disable the WPS feature of your WL559E, and add a WPS enabled
device by entering the needed PIN.
Security Mode. Select the type of encryption you want for your wireless
network.
WPS. Allows you to enable or disable the WPS feature of your WL559E.
Enrollee PIN. Enter this PIN to wireless client that will be connecting to
WL559E repeater to automatically configure the wireless device.
Registrar PIN. Here you can enter the WPS-PIN of wireless clients and
click apply for the WL559E to allow access and configure your wireless
client device automatically
Note: WPS will work only for WPA-PSK, WPA2-PSK and WPA/WPA2
encryption. Wireless client should support WPS feature to use this
option.
To Next Page
Loading...
