User Manual
Page 25 of 44
MAC Filter Settings
The MAC Filter Settings page will provide additional protection to your
wireless network. It allows or denies wireless clients from accessing the WL559E
with the use of the MAC address which is unique for every network devices.
To add a MAC Filter:
1. Specify your preferred Policy.
Disable. Disables the application of a MAC Filter to a specific
device or of all MAC Addresses.
Allow. Allows the specified MAC Addresses to connect to the
Wireless network.
Deny. Denies the specified MAC Addresses connection to the
Wireless network.
NOTE: By clicking the Apply button without specifying a MAC
Address, you would be applying the selected policy to all MAC
addresses on the list.
2. Enter the MAC Address of the device where the selected Policy would
apply.
To Next Page
Loading...
