User Manual
Page 23 of 44
Wireless Mode. This option allows you to select the type of wireless
standard you want to allow to connect to your wireless network.
Channel. You may opt to change your wireless channel when you are
getting poor reception. You may choose the least channel used in your
area for better wireless performance.
Channel Bandwidth. Allows you to set your Channel Bandwidth to
20MHz and 20/40MHz (Auto). It is strongly suggested to leave this in its
default value : 20/40MHz.
HT Data Rate and HT Guard Interval. These options are recommended
to be set to Auto for maximum efficiency.
To Next Page
Loading...
