WARRANTY
Vista
™
basic Instructions for Use 1/25
950787 Rev 6/02
WARRRANTY
B. Braun provides 24 months
warranty as of the date of delivery
for every Vista
™
basic Infusion
Pump. This includes the repair or
replacement of damaged parts as
a result of design/manufacturing
errors or material defects.
Modifications or repairs to the unit
by the owner or third parties
invalidate the warranty.
The warranty does not cover the
elimination of faults attributable to
incorrect/inexpert handling,
normal wear and tear, or
rechargeable batteries.
The CE mark confirms compliance
with the “Council Directive on
Medical Products 93/42/EEC”
dated the 14
th
of June, 1993.
B. Braun Melsungen AG
RESPONSIBILITY OF
MANUFACTURER
Manufacturer, assembly, and
installation personnel or instructors
can only be held responsible for any
effects on device safety, reliability,
and performance if
♦ Installation, expansion work,
readjustments, modifications, or
repairs are carried out by
personnel authorized by the
above,
♦ The electrical wiring for AC power
satisfies the requirements of VDE
0100, 0107, and/or the IEC
publications, or regional and/or
national variations,
♦ The device is operated in line with
the Instructions for Use, and
♦ Regular technical inspections
(Preventative Maintenance) are
carried out every 2 years as
outlined in the Service Manual.
INSPECTION ON DELIVERY
Despite careful packaging, the risk
of transport damage cannot be
entirely excluded. Upon delivery,
please check that nothing is
missing. Do not use a damaged
device! If the device is damaged,
contact the Service Department.
See “Maintenance, Storage, &
Service.”
Packaging: The pump packaging is
reusable.
Package Contents: Vista basic
Infusion Pump, drop sensor, power
cable, pole clamp, Instructions for
Use.
To Next Page
Loading...
