To Next PageTo Next Page
Need help?Do you have a question about the B.M.P. DYNAMICROLL and is the answer not in the manual?
Highlights critical safety warnings to be observed before and during use.
Provides definitions for technical terms used throughout the manual.
Explains the objective of the manual for owners and maintenance personnel.
Specifies the intended applications and limitations for the industrial door.
Lists essential instructions and precautions to prevent hazards and injuries.
Details mechanical, electrical, and material risks with corresponding preventive measures.
Information on sound pressure levels and factors influencing noise.
Instructions for environmentally responsible disposal of the door.
Diagram and list of components for the Dynamicroll with side-mounted motor.
Presents additional exploded views and an extended list of door components.
Key guidelines and precautions for installing the industrial door.
Lists the essential tools and equipment required for installation.
Details the control board layout, its functions, and a legend for its terminals and buttons.
Explains terminal connections for limit switches and other functions.
Details terminal connections for encoder functions and power supply.
Explains automatic and step-by-step operating modes configured via the control card.
Describes the procedure for manual operation of the door.
Essential safety precautions for personnel performing maintenance on the door.
Routine cleaning tasks and maintenance for door components.
Detailed checks for structure, electrical, mechanical, and curtain components with periodicity.
Provides solutions for common issues like control board failures, door movement problems, and card settings.
Addresses problems with resistive edges, photocells, and anti-jamming sensors.
Solves issues related to door stopping, partial closing, automatic closing, and intermittent operation.
Resolves problems with electrical parameters, photocell interference, and cable management.
Outlines the terms, coverage, limitations, and voidance conditions of the product warranty.
Provides contact methods and required details for submitting a repair request.
General| Category | Door Opening System |
|---|---|
| Max Width | 6000 mm |
| Maximum Door Width | 6000 mm |
| Hold Open Time | Adjustable |
| Application | Industrial, Commercial |
| Curtain Material | PVC |
| Safety Features | Photocells |
