2
Useful Sewing Tips 67
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
■ Aligning the fabric with a mark on the needle
plate or bobbin cover (with mark)
While sewing, align the edge of the fabric with
the 16 mm (approx. 5/8 inch) mark on the needle
plate or bobbin cover (with mark) depending on
the needle position (left or middle (center) needle
position stitches only).
For stitches with a left needle position
(Stitch width: 0.0 mm)
a Seam
b Presser foot
c Centimeters
d Inches
e Needle plate
f 1.6 cm (5/8 inch)
For stitches with a middle (center) needle position
(Stitch width: 3.5 mm)
a Seam
b Presser foot
c Inches
d Bobbin cover (with mark)
e 16 mm (5/8 inch)
6
4
3
5
2
1
3
2
To Next Page
Loading...
