Page 45
Wait for 2 minutes after cleaning before using your printer.
If the print head kit number is not entered correctly, printer malfunctions may occur and the warranty may be voided.
Cleaning is absolutely necessary after changing the print head. No print jobs can be run until the cleaning operation has finished.
Refer to section 3 – Maintenance to carry out cleaning.
Installing the new print head
7. Power up the printer and check that it is properly connected to a computer on which the printer’s BadgePass Print Suite is installed.
8. In Maintenance of BadgePass Print Suite, click on the Change print head tab.
9. Enter the PKN number of the print head kit in Enter PKN no., the number you noted down in step 1. Then click Confirm.
Cleaning the printer
On your printer’s control panel, the “CLEANING” light is lit:
Once cleaning has been carried out, your printer is once again ready to customize your cards.
CLEANING
Document History
BadgePass NXT5000 USER GUIDE
To Next Page
Loading...
