Need help?Do you have a question about the BadgePass NXT5000 and is the answer not in the manual?
General| Print Resolution | 300 dpi |
|---|---|
| Interface | USB |
| Print Technology | Dye Sublimation |
| Print Capabilities | Single-sided |
| Card Capacity | 100 cards |
| Card Sizes | CR80 (85.6 mm x 54 mm) |
| Connectivity | USB |
| Encoding Options | Magnetic stripe |
| Power Requirements | 100-240V AC, 50/60Hz |
Step-by-step instructions for connecting the printer to power and computer.
Instructions for fitting and handling printer ribbons for optimal print quality and recognition.
Procedure for installing the printer driver from the supplied CD to enable advanced printer functions.
Using BadgePass Print Suite to adjust printer parameters, view ribbon status, and configure settings.
Steps for preparing and printing a card, including document setup in Microsoft Word.
Procedure for routine cleaning cycles to maintain print quality and ensure print head warranty validity.
Guidelines for cleaning the print head using specific accessories to maintain optimal performance and prevent damage.
Comprehensive guide to diagnosing and resolving common issues such as print errors, quality issues, and jams.
Troubleshooting steps for 'Nothing prints', 'Blank card ejected', and other printing failures.
Detailed steps to remove jammed cards and preventive measures to avoid future jams.
Instructions for safely removing and installing a new print head unit.
Procedure for updating the printer's firmware via Windows to fix issues or add new features.
Steps for updating the printer driver to resolve malfunctions or benefit from new software options.
Information on contacting BadgePass partners and accessing online resources for further assistance.
Steps to configure magnetic encoder functions, stripes, and coercivity in the BadgePass Print Suite.
To Next Page
