BadgePass NXT5000 - Page 50

Page 50
The BadgePass NXT5000 printer will only operate with BadgePass Ribbons. If another ribbon is used it will print 25 prints then error out. If this happens, contact your
BadgePass Dealer. To maximize the quality and lifetime of the printed cards, the service life of your print head and the overall reliability of your printer, use BadgePass Ribbons.
• Automatic identification and setting
• Ribbon inserted in a cassette to make handling easier
• Graphic notification of the ribbon level (almost finished, finished)
• Integrated ribbon saving for monochrome printing
• Ribbons:
- YMCKO: 300 prints/roll
- YMCKO-K: 200 prints/roll
- 1/2 YMCKO: 400 prints/roll
- KO: 600 prints/roll
- Monochrome ribbons: 1000 prints/roll1
- Hologram ribbon: 400 prints/roll
1 Under specific conditions
Ribbons
• USB 1.1 (compatible 3.0)
• Ethernet TCP-IP, 10BaseT, 100BaseT (Traffic Led)
• Optional 802.11b/g wireless connection
Ports/connectivity
• Supplied with BadgePass Premium Suite® for Windows:
- Printer driver
- BadgePass Print Suite for the administration, management and configuration of the printer
- BadgePass Printer Manager for two-way graphic notification1
- Compatible with Windows2 (from XP SP3)
• Linux platform on request
• SDK available on request
1 Requires .net 4.0 client profile version
2 For older versions of Windows, you can only use the printer via a printer driver (there is no Print Center or Printer Manager).
Software
• LEDs
• Graphic printer notifications1:
- Feeder empty
- Cleaning alerts
- Ribbon nearly finished/finished warning, Etc.
1 Dependent on your version of Windows
Display
Document History
BadgePass NXT5000 USER GUIDE