BAFANG DP C010.CB User Manual

15
BF-UM-C-DP C010-EN November 2022
USER MANUAL FOR DISPLAY
Code Cause
Troubleshooting
Hub Motor System Mid Motor System

Phase wire in motor abnormal
1. Check whether the motor cable is
connected correctly or the cable (from
motor to controller) is damaged.
2. Troubleshoot the faulty part:
1) Replace the motor
2) Replace the controller
Replace the drive unit

Motor overtemperature
protection
(Only occur when the
motor is equipped with the
temperature sensor.)
1. If riding for a long time, turn off the
system and let the motor cool down.
2. If no ride or riding for a short time,
troubleshoot the faulty part:
1) Replace the motor
2) Replace the controller
1. If riding for a long time, turn off
the system and let the drive unit
cool down.
2. If no ride or riding for a short
time, replace the drive unit.

Motor temperature sensor
abnormal
(Only occur when the
motor is equipped with the
temperature sensor.)
1. Check whether the motor cable is
connected correctly or the cable (from
motor to controller) is damaged.
2. Troubleshoot the faulty part:
1) Replace the motor
2) Replace the controller
Replace the drive unit

Controller curent sensor
abnormal
Replace the controller Replace the drive unit

Controller overtemperature
protection
1. If riding for a long time, turn off
the system and let the controller cool
down.
2. If no ride or riding for a short time,
replace the controller.
1. If riding for a long time, turn off
the system and let the drive unit cool
down.
2. If no ride or riding for a short time,
replace the drive unit.

Controller temperature sensor
abnormal
Replace the controller Replace the drive unit

BAFANG DP C010.CB Specifications

General

Brand	BAFANG
Model	DP C010.CB
Category	Monitor
Language	English