7
BF-UM-C-DP C010.CN-EN June 2024
USER MANUAL FOR DISPLAY
The data that can be sent to the APP are as
follows:
No. Function
1 Speed
2
Power-assisted
mode
3 Battery capacity
5 Headlight state
6 TRIP
7 ODO
Range
9
Heartbeat
(custom)
10 Calories
11 Sensor signal
No. Function
12 Battery info.
13 System info.
14 Error code
7.6.8 USB Charging
When the HMI is off, insert the USB cable to
the charge port on the HMI, and then turn
on the HMI to start charging. The maximum
charge voltage is 5V and the maximum
charge current is 1A.
(Charging port USB: Type-C)
7.6.9 Service Tip
When the total mileage exceeds 5000 km,
the symbol will be displayed on the HMI,
reminding users to go to the after-sales
store for maintenance. The function is off
by default.
7.6.10 Riding Data Interface
Double press the button (<0.5S) to enter
the interface of riding data. Press the
button (<0.5S) to switch the pages. Dubble
press the button (<0.5S) again to return
the main interface.
When the real-time speed is less than 5
km/h and the power assisted mode is not
walk assistance, press and hold the
button
(>2S) to clear the riding data of Trip,
MAX, AVG, Time.
To Next Page
Loading...
