BAFANG DP C11.UART - Information - Error Code Record

13
DISPLAY MANUAL DP C11.UART
FUNCTIONS SETTING
b13
Recently not charging
time
Hour
d00 Number of battery cell
d01 Voltage of cell 1 mV
d02 Voltage of cell 2 mV
… … mV
dn Voltage of cell n mV
• Check record of error code
Enter into “Information” interface and
briefly press “+” key or “-” key to select
“Error Code” and briefly press “power”
key to check record. Briefly press “+” key
to circularly display records of error code
for latest ten times from “E-Code0” to “E-
Code9”. Briefly press “power” to exit back
to“Information” interface or press and hold
“+” key and “-” key to exit back to main
interface.