9
DISPLAY MANUAL DP C11.UART
NORMAL OPERATION
• Functional indications interface switch
The default interface is “TRIP” (single trip distance). it can circularly switch as “TRIP” (single trip dis-
tance) → “ODO”(total distance) → “MAX”(maximum riding speed) → “AVG”(average riding speed) →
“RANGE”(remaining distance) → “CALORIES/CAL”(KCal) → “POWER”(output power) → “TIME”(riding
time) → “TRIP”(single trip distance).
• Sate of charge indication for battery
It displays the state of charge for battery with one to five grids. When it display all five grids, it means
the battery has full capacity. If the frame of the battery icon flickers at the frequency 1 HZ, it means
battery needs to be charged immediately.
Battery icon Bars State of charge Icon diagram
5 75%-100%
4 50%-75%
3 30%-50%
2 10%-30%
1 5%-10%
LOW <5%
FLASH
To Next Page
Loading...
