32
BF-DM-C-DP C15-EN November 2019
Error Declaration Troubleshooting
37 WDT circuit is faulty
Using the BESST tool update the controller to see
if this resolves the problem. If not, please change
the motor.
41
Total voltage from the battery is
too high
Please change the battery.
42
Total voltage from the battery is
too low
Please Charge the battery. If the problem still
occurs, please change the battery.
43
Total power from the battery cells
is too high
Please change the battery.
44
Voltage of the single cell is too
high
Please change the battery.
45
Temperature from the battery is
too high
Please let the pedelec cool down.
If problem still occurs, please change the battery.
46
The temperature of the battery is
too low
Please bring the battery to room temperature.
If the problem still occurs, please change the
battery.
47 SOC of the battery is too high Please change the battery.
48 SOC of the battery is too low Please change the battery.
61 Switching detection defect
1. Check the gear shifter is not jammed.
2. Please change the gear shifter.
62 Manual gearbox cannot release Please change the motor.
71 Electronic lock is jammed
1. Using the BESST tool update the Display to see
if it resolves the problem.
2. Change the display if the problem still occurs,
please change the electronic lock.
81 Bluetooth module has an error
Using the BESST tool, re-update the software
onto the display to see if it resolves the problem.
If not, Please change the display.
To Next Page
Loading...
