113
SMOKE ALARM
STAINLESS STEEL SINK
Stainless steel sinks need little maintenance
other than cleaning immediately after use.
Most deposits can be removed by washing with
soap or mild detergent and hot water, followed
by a clean water rinse and drying with a soft
cloth to prevent water spotting.
For more tenacious deposits a non-abrasive
multi-purpose cream cleaner such as CIF
should be used, followed by a clean water rinse
and drying.
Tannin stains can be removed by a solution
of washing soda and water applied with a soft
cloth/sponge followed by a clean water rinse
to remove any residues, and drying with a soft
cloth.
When cleaning with anything other than water
be careful not to get the solution onto your
kitchen worktop.
Always avoid bleach and trigger-dispense
products and never use wire wool or leave wet
cloths, pads or containers on the surface as
they may form water marks.
Toilet Compartment Sink
OPAQUE FINISH
For the usual daily cleaning of the opaque sink,
use a scrub sponge such as Scotch-Brite with
a powder abrasive detergent (for example,
scouring powder).
1. Rinse with water.
2. Use a microfibre cloth to wipe.
GLOSSY FINISH
For the usual daily cleaning of the glossy sink,
use a damp cloth or sponge with liquid soap,
which does not contain abrasive particles.
1. Rinse with water.
2. Use a microfibre cloth to wipe.
Do not use abrasive detergents,
alcohol, acetone or solvents, because
they will damage the material. In
case of accidental contact with such
solvents, quickly rinse with water.
To Next Page
Loading...
