Need help?Do you have a question about the Balluff BNI PNT-508-105-Z031-002 and is the answer not in the manual?
General| Model | BNI PNT-508-105-Z031-002 |
|---|---|
| Operating Voltage | 18...30.2 VDC |
| Rated Operating Voltage Ue DC | 24 VDC |
| Transfer Rate | 100 Mbit/s |
| Protection Type IEC 60529 / Protection Class | IP67 |
| Storage Temperature | -25...85 °C |
| Connection | M12 connector |
Defines the intended use of the BNI PNT module.
Outlines requirements for installation and startup by trained personnel.
Provides crucial safety guidelines for operation and handling.
Explains how to plan projects using GSDML files and integrate modules.
Details the role of GSDML files for project planning.
Describes how to find and insert modules in the configuration software.
Explains how to configure module properties, port functions, and diagnostics.
Details configuring IO-Link/standard I/O modules and module addressing.
Describes how to change IO-Link parameters for port pins.
Explains how to set the device name and IP address.
Guides on how to start the tool for assigning a device name.
Explains how to assign a device name via MAC address or Blink Test.
Discusses troubleshooting common bus errors after configuration.
Explains module settings like global diagnostics and port functions.
Details options for global diagnostics, sensor/actuator undervoltage, and short circuits.
Describes how to define functions for individual port pins (NO input, NC input, Output).
Explains settings for data management and parameterization.
Guides on performing a factory reset of the module.
Introduces the integrated web server for status information and configuration.
Describes the Home page for reading module configuration and network activity.
Explains how process data and port status are visualized via LEDs.
Provides information on connected IO-Link devices and configuration options.
Shows how process data, parameterization, and events are displayed in the webserver.
Displays the current status of the module and network via LEDs.
Explains the diagnostics message structure and content.
Lists various channel error codes and their descriptions.
To Next Page
