Balluff BNI PNT-508-105-Z031-002 - 4 Technical Data; Dimensions BNI PNT-508-105-Z031; Mechanical Data; Operating Conditions

www.balluff.com
10
4 Technical data
4.1. Dimensions BNI
PNT-508-105-Z031
4.2. Mechanical data
Housing material
Die-cast zinc, matte nickel-plated
Housing protection type in
accordance with IEC 60529
IP 67 (only in plugged-in and screwed-down state, and
depending on the connector system which is used.)
Dimensions (W x H x D in mm)
84.4 x 185.4 x 47
Type of installation
Screw installation with 2 securing holes
Ground strap installation
M4
Weight
Approx. 950 gr.
4.3. Operating
conditions
Operating temperature T
a
Storage temperature
-5 °C ... 55 °C
-25 C ... 70 °C
EMC
- Immunität / Immunity
- Emission / Emission
EMC-directive 2004/108/EEC
- EN 61000-6-2
- EN 61000-6-4
Vibration/shock
EN 60068-2-6, EN 60068-2-27
EN 60068-2-29, EN 60068-2-64
4.4. Electrical data
Supply voltage
18...30.2 V DC, in accordance with EN 61131-2
Ripple
<1%
Input current
120 mA @24V
4.5. ProfiNet
PROFINET Port
2 x 10Base-/100Base-Tx
Cable types per IEEE 802.3
min. STP CAT 5e
Data transmission rate
10/100 Mbit/s
Max. cable length
100 m
Flow control
Half Duplex/Full Duplex (IEEE 802.33x-Pause)