Balluff BNI PNT-508-105-Z031-002 - 1 General; About this Manual; Structure of the Manual; Typographical Conventions

www.balluff.com
4
1 General
1.1. About this
manual
The BNI PNT-… is a decentral IO-Link input and output module for connecting to a
ProfiNet™ network.
1.2. Structure of the
manual
This manual is structured such that one chapter is builds on the other.
Chapter 1: General
Chapter 2: Basic safety instructions
……..
1.3. Typographical
conventions
The following typographical conventions are used in this manual.
Enumerations
Enumeration is shown in the form of lists with bullets.
• Keyword 1
• Keyword 2
Actions
Action instructions are indicated by a preceding triangle. The result of an action is indicated
by an arrow.
 Action instruction 1
 Result of action
 Action instruction 2
Actions can also be indicated as numbers in parentheses.
(1) Step 1
(2) Step 2
Syntax
Numbers:
Decimal numbers are shown without additional information (e.g., 123),
hexadecimal numbers are shown with the additional indicator hex (e.g., 00
hex
) or the prefix
"0x" (e.g., 0x00).
Cross-references
Cross references indicate where further information on the subject can be found.
1.4. Symbols
Note
This symbol indicates general notes.
Note
This symbol indicates a safety instruction that must be followed without exception.
1.5. Abbreviations
BNI Balluff Network Interface
EMC Electromagnetic Compatibility
FE Functional ground
I Standard input port
O Standard output port
PNT ProfiNet™
UA Actuator supply undervoltage
US Sensor supply undervoltage