EasyManua.ls Logo

Balluff BNI PNT-508-105-Z031-002 - Dimensions BNI PNT-508-105-Z031-002; Mechanical Data; Operating Conditions; Electrical Data

Balluff BNI PNT-508-105-Z031-002
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Balluff Network Interface ProfiNet™
www.balluff.com
11
4 Technical data
4.6. Dimensions BNI
PNT-508-105-
Z031-002
4.7. Mechanical data
Housing material
Die-cast zinc, matte nickel-plated
Housing protection type in
accordance with IEC 60529
IP 67 (only in plugged-in and screwed-down state, and
depending on the connector system which is used.)
Dimensions (W x H x D in mm)
84.4 x 185.4 x 47
Type of installation
Screw installation with 2 securing holes
Ground strap installation
M4
Weight
Approx. 950 gr.
4.8. Operating
conditions
Operating temperature T
a
Storage temperature
-5 °C ... 55 °C
-25 C ... 70 °C
EMC
- Immunität / Immunity
- Emission / Emission
EMC-directive 2004/108/EEC
- EN 61000-6-2
- EN 61000-6-4
Vibration/shock
EN 60068-2-6, EN 60068-2-27
EN 60068-2-29, EN 60068-2-64
4.9. Electrical data
Supply voltage
18...30.2 V DC, in accordance with EN 61131-2
Ripple
<1%
Input current
220 mA @24V
4.10. ProfiNet
PROFINET Port
2 x 100Base Fx POF
Date transmission rate
100 mbit/s
Max. cable length
50 m
Flow control
Half Duplex/Full Duplex (IEEE 802.33x-Pause)

Table of Contents

Related product manuals