Balmar SG200 - Specifications

27
Specications
Standard Conguration 1 Bank per SmartShunt Device
2 Start/Auxiliary Voltage Sense
Lines
(Up to 32 Devices including Dis-
plays and SmartShunts can be
added to single network.)
Supply Voltage Range 8-60V
MAX Bank Current-Monitored
Battery Size
1Ah-1310Ah
Average Supply Current Display On: 20mA @ 12V
Sleep Mode: 10mA @ 12V
SmartShunt Operating
Temperature:
-40°C - +85°C (-40°F- +185°F)
SmartShunt Max Current @
24°C (75°F)
350A Continuous
600A for 10 minutes
Display Values State of Charge (SoC%)
State of Health (SoH%)
Voltage (V)
Charge/Discharge Current (A)
Time Remaining (Hrs, Minutes)
History, Faults and Alerts
Communications Cable 4-wire, 22AWG, Shielded
4-pin Deutsch DT Style
Grounding Negative Battery Connection
Standards Compliance CE EMC Directive 2014/30/EU
RoHS 2 Directive 2011/65/EU
SmartShunt Dimensions Length: 4.86” (123.7mm)
Width: 3.34” (84.8mm)
Height 2.01” (50.9mm)
Gauge Minimum Depth
(with connector)
2.75 inches, 70mm
Weight SmartShunt: 0.62 lbs
Color Display: 0.16 lbs
Maximum Panel Depth for
Gauge Installation
1/2 inch (12.7mm)
Protection Rating IP65 (Display from Front)
IP67 (SmartShunt)