Why is my bamar GFM C0 Boating Equipment system hard to turn?
If your Bamar Boating Equipment system is hard to turn, the furling line blocks may not be sliding easily. Clean and lubricate the furling blocks to resolve this issue.
Why is my bamar GFM C0 Boating Equipment hard to turn?
If your Bamar Boating Equipment system is hard to turn, check if the line blocks slide easily. To fix this, clean and lubricate the blocks.
What to do if my bamar GFM C0 Boating Equipment system does not rotate?
If your Bamar Boating Equipment system does not rotate, a halyard may be wrapped around the foils. Check that the halyards have been correctly positioned.
What to do if my bamar GFM C0 doesn't rotate?
If your Bamar Boating Equipment system doesn't rotate, a halyard might be wrapped around the forestay at the masthead. Make sure the halyards are correctly positioned.
What causes the furling line to jam the drum on bamar GFM C0 Boating Equipment?
If the furling line jams the drum on your Bamar Boating Equipment, it might be because the first block is badly positioned, the line is too thick, or the drum is overfilled. Refer to chapter C-10 for solutions.
General| Brand | bamar |
|---|---|
| Model | GFM C0 |
| Category | Boating Equipment |
| Language | English |
To Next Page
