Bandit 490 - Infeed Hopper Components

Bandit
Copyright 11/10 PAGE 39
MODEL 490 INFEED HOPPER COMPONENTS
LOCATION PART NUMBER DESCRIPTION
1. 932-2000-03 Infeed Hopper Assembly
2. 900-7901-54 Rubber Infeed Hopper Curtain
3. 932-3000-45 Mount Strap For Infeed Hopper Curtain
4. 900-9902-72 Manual Holder
5 a. 980-0507-42 Wooden Push Paddle (Modied To 17” Wide)
b. 900-4914-18 Plastic Knob For Push Paddle Mount (Not Shown)
6 a. 900-2905-41 Contact Block Only For Rear Engine Shut Down Switch
b. 900-2901-03 Red Push Button Assembly For Rear Engine Shut Down Switch
c. 900-2901-06 Box For Rear Engine Shut Down Switch
7 a. 900-4901-83 Spring Lock Pin
b. 900-7900-93 Rubber Cap For Spring Lock
NOTICE Nuts, bolts, washers, and all other components can be ordered by physical description.