Bandit 490 - Page 4

Bandit
Copyright 11/10 PAGE 4
BANDIT INDUSTRIES INC. LIMITED WARRANTY
(989) 561-2270
INTRODUCTION & WARRANTY
Bandit Industries Inc., also referred to as “Manufacturer” warrants this new product to be free of
defects in workmanship and material for a period of 1 year or 2000 operating hours, which ever comes
rst.
This warranty takes effect upon delivery to the original retail purchaser. The manufacturer at it’s
option will replace or repair at a point designated by the manufacturer, any parts which appear to have
been defective in material or workmanship. The manufacturer is not responsible for labor, consequential
damages, traveling or down time expenses.
This warranty and any possible liability of Bandit Industries Inc., is expressly in lieu of any other
warranties, expressed or implied, including but not limited to, any implied warranty or merchantability
of tness for a particular purpose and of any noncontractual liabilities including product liabilities based
upon negligence or strict liability. Bandit Industries Inc., will not be liable for consequential damages
resulting from breach of warranty.
All parties involved agree that the Owner’s Sole and Exclusive Remedy against the Manufacturer,
whether in contract or arising out of this warranty, instructions, representations, or defects shall only
be for the replacement or repair of defective parts as provided herein. In no event or circumstances
shall the Manufacturer’s liability exceed the purchase price of the machine. The buyer also agrees
that no other remedy (including but not limited to consequential or incidental loss) shall be available
to him or her.
It is absolutely necessary to return the Warranty Validation Form, completely and accurately lled
out, and notify Bandit Industries Inc., in writing within ten (10) days from the date of purchase to
validate this warranty. If Warranty Validation Form is not on le, all Warranty Consideration is NULL
AND VOID.
This warranty will
not apply if the Bandit Chipper is not operated with replacement parts or equipment
not manufactured or recommended by Bandit Industries, Inc.
This warranty will not apply if the Bandit Chipper is not operated in a manner recommended by the
manufacturer. The following examples would void the warranty:
1. The completed Warranty Validation Form is not on le.
2. The Bandit Chipper has been abused, or not serviced properly.
3. Repairs or attempted repairs made without prior written authorization.
4. Repairs made due to normal wear are not warrantable.
5. The Chipper was involved in, or damaged by an accident.
6. The Chipper was damaged from any type of foreign material.
The owner is responsible for all scheduled maintenance as explained in the Operators Manuals.
Negligence of proper maintenance or any other negligence, accident or re; nor with failure to
adjust, tighten, or replace wear items included but not limited to items such as knives, knife anvil,
belts, lubrication uids, bearings, lters, hydraulic components, loose nuts or bolts, etc. may void
warranty.
All components and parts being returned to Bandit Industries for warranty consideration must
be complete and assembled when delivered. Hydraulic components and parts must be returned
assembled with all uid ports capped or plugged and free of foreign contamination, or warranty will
not be considered.