Banner ABR 7000 Series - Maximum Line Speed and Exposure Calculations

Data Matrix 0.38 mm (15 mils)
Reading Distance
Horizontal Reading Width
in
14 15 16 17 18 19 20 21 22 23
0
2
4
-1
-3
5
-4
mm
1
3
-2
-5
Hardware Settings
Code Symbology Data Matrix ECC 200
Code Resolution 0.38 mm (15 mils)
Tilt Angle 45°
Skew Angle 15°
Focusing Distance (mm) 495
Software Parameters
Internal Lighting Very High Power Strobed
ABR7116-RSE2
Exposure Time (μs) 380
Gain 12
Figure 146. Data Matrix 0.38 mm (15 mils)
9.4 Maximum Line Speed and Exposure Calculations
When the Dynamic reading option is selected in the Image Auto-Setup or Automatic Setup window, the maximum allowable
image exposure is automatically calculated according to the formula described in this section, using the parameters
entered.
The Exposure Time (or Shutter) parameter defines the time during which the image will be exposed to the reader to be
acquired. This parameter depends heavily on the environmental conditions (external lighting system, image contrast, etc.).
ABR 7000 Series Barcode Reader
www.bannerengineering.com - Tel: + 1 888 373 6767 117