3. Click OK.
4.
Set the desired Request Packet Interval (RPI) value and click OK.
Figure 92. Module Properties Report: Ethernet
8.2.5 ABR Series AOI Installation in Logix Designer Software
1. Download the Add-On Instruction (AOI) file Banner_ABR_AOI_IO_Data_1_0.L5X from
www.bannerengineering.com
.
2. In the Controller Organizer window, right-click on the Add-On Instruction folder and select Import Add-On
Instruction.
Figure 93. Import Add-On Instruction
3. Navigate to the correct file location, and select the AOI to be installed.
Figure 94. Select Add-On Instruction
ABR 7000 Series Barcode Reader
74 www.bannerengineering.com - Tel: + 1 888 373 6767
To Next Page
Loading...