4. Click Open.
The Import
Configuration window opens. The default selection creates all of the necessary items for the AOI.
Figure 95. Import Configuration
5. Click OK to complete the import process.
The AOI is added to the Controller Organizer window and looks similar to the following figure:
Figure 96. AOI Successfully Imported
6. Drag the AOI from the Controller Organizer to your ladder logic program to add the
Banner_ABR_AOI_IO_Data_1_0 AOI to the program.
Figure 97. New AOI Added to the Program
ABR 7000 Series Barcode Reader
www.bannerengineering.com - Tel: + 1 888 373 6767 75
To Next Page
Loading...