13.2 ABR 7000 Recommended Illuminators
In the following table, macro-cases are listed, and for each of them, the most suitable ABR 7000 lighting systems used to
resolve the application.
Application Characteristics Red Multicolored
DPM Central
Multicolored
DPM Peripheral
Printed codes on opaque paper or labels having a flat
surface
OK
Laser Etching or Ink Jet code marking on an opaque, flat
surface having no evident machining
flaws
OK
Code marking on an opaque, rough surface OK X
Code marking on a
flat surface with evident machining flaws
produced by machining tools
X OK
Laser Etching or Dot Peening code marking on a
flat, highly
reflective surface
X X
Code marking on a curved surface X X OK
Red-printed code on white background X X OK
Key:
—Suggested lighting system
OK—Compatible lighting system
X—Lighting system not recommended
Note: For correct use of the Multicolored DPM Peripheral illuminator, verify that the application working
distance is within the lighting systems working distance. See the following table.
Table 8: Lighting System Working Distances
Reader Model Lighting System Working Distance
ABR71x9-RSE2 Red 20 to 550 mm
ABR71xx-MSE2 Multicolored DPM Central LED Group 20 to 250 mm
ABR71xx-MSE2 Multicolored DPM Peripheral LED
Group
20 to 50 mm
Important: The minimum and maximum DPM application distance is limited by both the lighting system
working distance and the reader focus distance.
For example the minimum application distance is limited by the reader minimum focus distance (25 mm
for Liquid Lens Autofocus models). The maximum application distance is limited by the smaller of the
illuminator maximum working distance or the lens maximum focus distance. See also
Global FOV
Diagrams
on page 82.
ABR 7000 Series Barcode Reader
www.bannerengineering.com - Tel: + 1 888 373 6767 131
To Next Page
Loading...