Banner ABR 7000 Series - Page 30

TCNM-ACBB1 Function
+V
I1A
I1B
-V
Power Source - External Trigger
External Trigger A (polarity insensitive)
External Trigger B (polarity insensitive)
Power Reference - External Trigger
The yellow Trigger LED is on when the active state of the External Trigger corresponds to ON.
External Trigger Input Connections Using ABR Power
CAUTION: Power from the Vdc/GND spring clamps is available directly to the Input Device on the +V/-V
spring clamps, and does not pass through the Power Switch (ON/OFF) inside the TCNM-ACBB1.
Disconnect the power supply when working inside the TCNM-ACBB1.
Jumper
Blue
Black
Brown
PNP Photoelectric Sensor
Figure 28. PNP External Trigger Using ABR Power
ABR 7000 Series Barcode Reader
30 www.bannerengineering.com - Tel: + 1 888 373 6767