BaoFeng Tech BF-F8HP - AL-MOD - Alarm Mode; TDR-AB - Transmit selection while in Dual Watch mode

VISIT BAOFENGTECH.COM AND MIKLOR.COM FOR DOWNLOADS AND HELP
71
29
WT-LED - Display
backlight color,
Standby
OFF [0] | BLUE [1] | ORANGE [2] |
PURPLE [3]
Default: PURPLE
30
RX-LED - Display
backlight color-
Receive
OFF [0] | BLUE [1] | ORANGE [2] |
PURPLE [3]
Default: BLUE
31
TX-LED - Display
backlight color-
Transmit
OFF [0] | BLUE [1] | ORANGE [2] |
PURPLE [3]
Default: ORANGE
32
AL-MOD - Alarm
Mode
SITE [0]: Sounds alarm through
your radio speaker only
TONE [1]: Transmits a cycling
tone over-the-air
CODE [2]: Transmits '119' (911 in
reverse?) followed by the ANI
code over-the-air
SITE: Sounds alarm through your radio
speaker only
TONE: Transmits a cycling tone over-the-
air
CODE: Transmits '119' (911 in reverse?)
followed by the ANI code over-the-air
33
BAND - Band
Selection
VHF [0] | UHF [1]
In VFO/Frequency mode, sets [A] or [B] to
the VHF or UHF band.
34
TDR-AB - Transmit
selection while in
Dual Watch mode
OFF [0] | A [1] | B [2]
When enabled, priority is returned to
selected display once the signal in the
other display disappears.