Battery level (indicated by 9 segments)
Display signals with alarm code 12 when battery is completely
discharged. Charge the battery when indicating on 1 segment.
Press E-S-H button, you can set operating mode for system.
(E-economic mode, S-midrange mode, H-high mode)
H-High mode: High acceleration, decelerate rate, max. grade ability,
suitable for loading large quantity goods in short time and climbing
abrupt slope, this mode wastes electricity, only used when
necessary.
S-Midrange mode: The parameter lower than High mode
E-Economic mode: The parameter has been optimized. Working on
this mode in general for saving electricity.
1. Start the key switch, press ENTER button for 3 seconds, enter
into adjust and diagnosis mode.
2. When operating, press for 3sec, enter into diagnose mode.
3. Quit when pressing ENTER under diagnosing mode, the enter
key is used for setting new parameter.
1. Reduce the parameter in adjusting mode when pressing this key.
2. The parameter can be reduced in adjusting mode.
3. Press the key for 1sec, indicating mileage or weight.
Note: The function of Up key is same to down key, enter, up and down key have
some functions not activated.
Four LED signals on the left of compact meter indicate when operating the relevant
switch.
Alarm indication; red color LED
Lamps indication; green color LED
Steering switch on, steering signal activated; green color LED
Insufficient brake fluid; red color warning LED (optional)
To Next Page
Loading...
