R5900120 /03 ClickShare CX-50 Gen284
Image 5–5 Configuration welcome page
Click Start configuration.
Fill out the necessary items and click Next to continue.
To return to the previous step, click on Back.
For more information about a specific topic, see one of the following topics.
The ClickShare Configuration Wizard can be started at any time to change the configuration just by clicking on
ClickShare Configuration Wizard at the left bottom of each screen or on Lauch configuration wizard on the
start page.
Firmware Firmware update – automatically See
“Firmware Update”, page 141
Firmware update – manually
Personalisa-
tion
Language on-screen text See
“On-Screen ID information”, page 85.
Meeting room name, location name and
welcome message
See
“On-Screen ID information”, page 85.
System Time zone, manual time setup See “Date & Time setup, manually”, page
128
.
Use NTP See
“Date & Time setup, time server”, page
130
.
Security Level settings See
“Security, security level”, page 122.
Password ClickShare Configurator password See
“Security, passwords”, page 124.
Network Frequency band, channel Wi-Fi passphrase See
“Wi-Fi settings, Access Point settings”,
page 100
.
SmartCare for
ClickShare
Register your device to get the SmartCare
package
See
“Registration to XMS Cloud”, page 59.
CX-50 Gen2 Configurator
To Next Page
Loading...
