EN55032-CISPR32 Class B ITE (Information Technology Equipment)
This is a class B product. In a domestic environment this product may cause radio interference in which cas e the user may be required to
take adeq uate measures.
If this equipment does cause interference to radio or television reception, the user may try to correct the interference by one or m ore of the
following measures :
• Re-orientation of the receiving antenna for the radio or television.
• Relocate the equipment with respect to the receiver.
• Plug the equipment into a different outlet so that the equipment a nd receiver are on different branch circuits.
• Fasten cables connectors to the e quipment by mounting screws.
Federal Communication Commission Interference Statement
You are cautioned that changes or modifications not expressly approved by the part responsible for com pliance coul
d void the user’s
authority to oper ate the equipme nt.
This equipment has been tested and found to com ply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gen-
erates, uses and can radiate radio frequency energy and, if not ins talled and used in accordance with t he instructions, may caus e harmful
interference to radio c omm unications. How ever, there is no guarantee that interference will not occur in a par ticular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipm ent off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
You may also find helpful the following booklet, prepared by th e FCC: "How to Identify and Resolve Radio-TV Interference Problems." This
booklet is available from the U.S. Government P rinting Office, Washington D.C. 20402.
Changes and Modifications no t expressly approved by the manufacturer or registrant of this equipment can void your authority to operate
this equipment under Federal Com munica tions Commis sions rules.
In order to maintain compliance with FCC regulations shielded cables must be used with this equipment. Operation with non-approved
equipment or unshielded cables is likely to result in interference to radio & television reception.
FCC RF Radiation Exposure Statement: T his device is capable of operating in 802.11a mode. For 802.11a devices operating in the
frequency range of 5.15 - 5.25 G Hz, they are restricted for indoor operations to reduce any potential harm ful interference for Mo bile Satellite
Services (MSS) in the US. W IF I Access Points that are capab le of allowing your device to operate in 802.11a mode (5 .15 - 5.25 GH z band)
are optimized for indoor use only. If your W IFI network is capable of operating in this mode, please restrict your WIFI use indoors to not
violate federal regulations to protect Mobile Satellite Services.
1. This Transmitter must not be co-located or oper ating in conju
nction with any other antenna or transmitter.
2. This equipment complies with RF radiation exposure limits set forth for an unc ontrolled environment.
This equipment s hould be installed and ope rated with a minim um distance of 20 cm between the radiator and your body.
Base Unit FCC ID: 2AAE D-R9861510
Button FCC ID (model R9861006D0 1): XF6-RS9110N1103
Button FCC ID (model R9861500D01): 2AAED-R 9861500D01
ClickShare Button R9861500D0 1 has been tested and mee ts the FCC RF exposure guidelines.The maximum SAR v alue reported is
0.915W/kg.
Canada, Industry Canada (IC) Notices
This device complies with Industry Canada licence-exempt RSS standard(s). O peration is subject to the following two conditions: (1) this
device may not cause interference, and (2) this device mu st acce pt an y interference, inc luding interference that may cause undesired
operation of the dev ice.
Radio Frequency (RF) Exposure Information
The radiated output po wer of the Barco Wireless Device is below the Industry Canada ( IC) r adio frequency exposu re limits. Th e Barco
Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized .
Caution: Exposure to Radio Frequency Radiation.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
