6. Maintenance
6. MAINTENANCE
General maintenance information
The Eonis does not require any scheduled maintenance or calibration activities. We recommend to use
QA Web with the Barco default tests and frequencies to calibrate and maintain the display or return the
display to a Barco approved maintenance organization. In any case of doubts, contact the Barco Health-
care Division.
6.1 Cleaning instructions
To clean the display
Clean the display using a sponge, cleaning cloth or soft tissue, lightly moistened with a rec
ognized clean-
ing product for medical equipment. Read and follow all label instructions on the cleaning product. In case
of doubt about a certain cleaning product, use plain water.
Do not use following products:
• For black model; alcohol/solvents at higher concentration > 5%, for white model; alcohol/solvents at
higher concentration > 70%
• Strong alkalis lye, strong solvents
•Acid
• Detergents with fluoride
• Detergents with ammonia
• Detergents with abrasives
• Steel wool
• Sponge with abrasives
• Steel blades
• Cloth with steel thread
CAUTION: Take care not to damage or scratch the front glass or LCD. Be careful with
rings or other jewelry and do not a pply excessive pressure on the front glass or LCD.
CAUTION: For blac k model only: Do not apply or spray liquid directly to the display as
excess liquid may cause damage to internal electronics. Instead, apply the liquid to a
cleaning cloth.
K5903081 EONIS 08/03/2016 21
To Next Page
Loading...
