7. Important information
Stand-by
Equipotentiality
The screw on the Potential equalization conductor is not for fixing purposes.
Please make sure that the conductor can be detached without the use of a tool.
Symbols on the box
On the box of the device, you may find the following symbols (nonrestrictive list):
Indicates a device that can be broken or damaged if not handled carefully when
being stored.
Indicates a device that needs to be protected from moisture when being stored.
Indicates the storage direction of the box. The box must be transported, handled
and stored in such a way that the arrows always point upwards.
15
n
or
n
Indicates the maximum number of identical boxes which may be stacked on each
other, where “n” is the limiting number.
20 - 30 Kg
Indicates that the box should be carried with two persons.
Indicates that the box should not be cut with a knife, a cutter or any other sharp
object.
-20 °C
+60 °C
xx
yy
Indicates the temperature limits
7
to which the device can be safely exposed when
being stored.
85 %
5 %
x
yy
Indicates the range
7
of humidity to which the device can be safely exposed when
being stored.
106 kPa
50 kPa
xx
yyy
Indicates the range
7
of atmospheric pressure to which the device can be safely
exposed when being stored.
7.6 Legal disclaim er
Disclaimer notice
Although every attempt has been made to achieve technical accuracy in this document, we assume no
responsibility for errors that may be found. Our goal is to provide you with the most accurate and usable
documentation possible; if you discover errors, please let us know.
Barco software products
are the property of Barco. They are distributed under copyright by Barco NV or
Barco Inc., for use only under the specific terms of a software license agreement between Barco NV or
7. Values for xx and yy can be found in the technical specifications paragraph.
K5903081 EONIS 08/03/2016 33
To Next Page
Loading...
