48 Display Controller
Disable 10-bit grayscale
Use this option for standard Windows®-based applications that require
8-bit color support (256 colors), such as Internet Explorer, Excel, etc.
Do not use this option for applications that require 10-bit pixel support
(1024 simultaneous shades of gray) and use extended depth graphic
libraries such as WinBarco.
Description of 10-bit grayscale: To show 1024 simultaneous shades of
gray all BarcoMed “H” series display controllers, such as the BarcoMed
5MP2FH, BarcoMed Coronis or BarcoMed Coronis 5MP for example, run
in extended depth (10-bit) mode by default.
Implications: When turned on the “Disable Extended Depth” option
causes a BarcoMed Coronis display controller to run in 8-bit mode, which
results in increased performance since the frame buffer is set to run with
8-bit pixels. While this option may be used with applications that
normally require 10-bit support, there will be a loss of pixel depth, i.e.
256 shades of gray instead of 1024 simultaneous shades of gray.
Disable RGB To Static Gray Color Translation
Select Disable RGB To Static Gray Color Translation if you wish to have
RGB values equally weighted, with 1/3 each. When not selected, then
the International Commission on Illumination (CIE – Commission
Internationale de I’Eclairage) model will be adapted, which weights the
colors as 59% Green, 30% Red, 11% Blue.
Monitor Configuration
The Monitor configuration page allows you to switch between the
following monitor configurations for the displays connected to a
BarcoMed controller:
• SingleView
A single large desktop spans across both displays.
• DualView
Both displays are enabled independent of each other.
To Next Page
Loading...
