Display Controller 49
Graphics Board
Update Firmware... Button: Clicking this button will launch the
BarcoMed Hardware Configuration utility. This program allows the user to
flash update the firmware stored in the ROM of the currently selected
BarcoMed display controller. The BarcoMed Hardware Configuration
utility is implemented in a Wizard format, which guides the user through
the flash update procedure. The user will be prompted to select a
firmware update file to use for the update process. This file will be
provided by Barco Medical Imaging Systems if and when a firmware
update is required.
Device Details
From the Device Details tab you can access the Device Details page,
which provides detailed information about the display controller
connected to the active display. This information is useful in debugging
issues that may occur when using your Barco Display(s).
To Next Page
Loading...
