Barco KVD5521 - Loop-Through, Scaling, and Splitting; No Scaling and no Splitting

5. Data processing
5.2 Loop-through, scaling, and splitting
The active input (OPS, DVI, DisplayPort, HDMI) has loop-through to the DisplayPort output.
A source connected to DisplayPort IN (DP IN) of any display can be shown on multiple displays The DisplayPort
OUT (DP OUT) of the previous display has to be connected to the DP IN of the following display, see schematics.
5.2.1 No scaling and no splitting
In this mode all displays show the entire source. The display mode can be Actual size, Fit to screen, or Keep
aspect ratio.
Loop-through of a source, group dimension 1x1 (=splitting off), display mode set to Actual size ( = scaling off)
Barco - KVD5521, IVD5521, HVD5521 - R591341 - User Manual - Revision 05 - November 2016
_______________________________________________________
47