Barco KVD5521 - Splitting and Scaling

5. Data processing
5.2.2 Splitting and scaling
In these modes every display shows a part of the source. Which part of the pixels has to be displayed by which
display is defined via the group dimension (the area the source has to be displayed) and the position of the
display in this group.
The position of the display within the group
is independent from its order in the chain,
i.e. the cabling!
The position of the display in the group is
defined by its horizontal (column) and
vertical (row) position, not with reference to
the display wall, but to the group.
This setting is done in the web interface of
Green BCM
La position de l'affichage au sein du
groupe est indépendante de sa position
dans la chaîne, c'est à dire le câblage!
La position de l'écran dans le groupe est
définie par l’horizontale (colonne) et la
position verticale (en ligne), et non par
rapport au mur d’image, mais du groupe.
Ce réglage se fait dans l'interface web du
Green BCM
The display mode can be Actual size, Fit to screen, or Keep aspect ratio. The setting refers to the group!
Loop through of a source, group dimension 1x1 (= splitting off), display mode set to Fit to screen (= scaling on,
the pixels of the source are up scaled to match the display resolution).
48
_____________________________________________________________
Barco - KVD5521, IVD5521, HVD5521 - R591341 - User Manual - Revision 05 - November 2016