7. Web interface
7 Web interface
The displays feature a web interface for controlling and monitoring.
To access the web interface and to address a display, proceed as follows:
Connect the LAN 1 interface of the display to a PC/laptop.
On the PC/laptop, launch a web browser.
In its address bar, enter the IP address of the LAN1 interface:
Http://192.168.10.2
(The PC/laptop the web browser is running on needs to be in the same subnet as the display. Assign the
PC/Laptop a static IP address.
The display has two network interfaces, LAN1 and LAN2.
These are the default IP addresses:
LAN 1: 192.168.10.2
LAN 2: 192.168.12.2
Basically you can connect to either of the interfaces. It might be useful to decide on a clear
strategy how to use the interfaces, e.g. LAN1 for communication with the display, LAN2 for
future use.
The display’s landing page opens:
The web interface is explained in the reference manual web interface OVD/KVD/IVD.
.
Barco - KVD5521, IVD5521, HVD5521 - R591341 - User Manual - Revision 05 - November 2016
_______________________________________________________
55
To Next Page
Loading...
