Installation
14
Installation
Precautions
• Keep your original packaging. It is designed for this display and
is the ideal protection during transport.
• Avoid reflections in the flat panel to reduce eye strain.
• Place the display on a strong and stable table or desk (desktop
version).
• Keep the display away from heat sources and provide enough
ventilation around the display.
• Do not scratch or apply pressure to the LCD panel. This may
damage the panel permanently.
Display installation
Power connection
To connect the power:
1. To get access to the connectors, remove the connector
compartment cover by pulling down the 2 clips at the longest side
of the cover.
2. Connect one end of the proper power cable to the AC input of the
display.
Figure 4
3. Connect the other end of the power cord to a power outlet.
To Next Page
Loading...
