Barco MVGD 1318 CR/ER - Locking and Unlocking User Controls

Operation
43
Service
Service information is a submenu from General Information,
containing the following items:
Firmware
Firmware is a submenu from General Information, containing the
following items:
Locking and unlocking user controls
The User Controls function allows to disable or enable the control wheel
functions.
When user controls are disabled, you cannot:
• display and use the Extended OSD
Name Description
Display Name The display type
Display Ser No Indicates the display serial number
Display Stock No Indicates the display order number
Panel Indicates the flat panel serial number
Panel Prod Date Indicates the flat panel production date
Name Description
Boot Code Version The version of the internal boot code
Run Code Version The version of the internal run code
CPLD Code Version The version of the internal CPLD code
FPGA Version The version of the internal FPGA code
Preset Table Version The version of the predefined Preset table
Scaler Version The version of the scaler hardware