Display installation
35
Figure 12
4. Connect the other end of the power cord to a grounded power
outlet.
We recommend to use an additional surge protector between the
power supply unit and the power outlet to protect the equipment
against sudden power variations.
Figure 13
Video connection
Connecting DVI signals: One display:
1. Connect one end of the DVI cable to the DVI input of the display.
2. Connect the other end of the DVI cable to the DVI connector of the
display controller board. If this board has 2 video heads (2 video
outputs), connect to Vid 1 (Head A).
Connecting DVI signals: Two displays:
1. Connect the left display (when looking at the front side) to Vid 1 as
described above.
To Next Page
Loading...
