Display operation
63
Complete OSD overview
Main menu
Luminance
Settings
Name Description
Luminance Adjust the target luminance to which the dis-
play will be stabilized.
Settings Change settings for DPMS, Power LED and User
Controls
Information Read information about the display
Name Description
Luminance Target Manually adjust the luminance
The calibrated luminance is indicated as 100%
Name Description
DPMS Switch on/off the automatic power saving sys-
tem (DPMS)
Power LED Switch the power LED on/off. Note: The LED's
orange DPMS state is not influenced by this set-
ting. So, when the display goes into power-sav-
ing mode, the LED will turn orange, even if it
was switched off by this setting.
User Controls Disable the control wheel functions
To Next Page
Loading...
