Barco NIO 5MP - Basic Display Functions

Display operation
60
Display operation
Stand-by switching
When the display is on and no on-screen display is visible, push the
control wheel at the front for a few seconds to switch the display in
stand-by. The LED turns orange.
When the display is in stand-by, push and hold the control wheel to
switch it back on. The LED turns green.
Figure 25
On-screen display
About the on-screen display
The on-screen display (OSD) has a hierarchical tree structure, with
several levels. The top level is the “Main Menu”.
Figure 26: Main menu in standard mode
E-5420
MAIN MENU
Luminance
Settings
Information
EXIT
BAR CO
Push and hold