Settings for optimal display performance throughout the product lifetime
47
To activate appropriate screen saving, proceed as follows:
1. In the display OSD menus, open the Settings menu and switch
DPMS on. For more information, please consult the display
operation chapter.
2. In Windows, open the Display control panel. Open the Screen
Saver tab.
3. Select a screen saver from the Screen saver drop-down box.
4. Set the Wait time to 10 minutes.
5. Click the button Power... The Power Options Properties dialog
opens.
6. In the Turn off monitor drop-down box, select After 20 mins.
7. Click Apply.
8. Close the control panel.
To Next Page
Loading...
