Installing drivers and software
Nio display systems 55
a) browse to the root directory of the BARCO NIODisplay System
Installation CD-ROM.
b) Click on the file, Setup.exe, and click Open.
or
a) Browse to the root directory of the location where you
saved the contents of your B
ARCO NIODisplay System
Installation CD-ROM.
b) Click on the file, Setup.exe, and click Open.
5. In the Open address window, place your cursor at the end of the
line of text that appears and add the following text after
Setup.exe, a space and -silent. Click OK.
Example (where D is the name of your CD/DVD drive):
D:\Setup.exe -silent
See figure 26 for an example of how the command line window
should look when using the silent install from the B
ARCO NIODisplay
System Installation CD-ROM.
Figure 26:
To Next Page
Loading...
