Installing drivers and software
46 Nio display systems
Installing drivers and software
This chapter will guide you through the installation of the drivers,
software and documentation associated with your B
ARCO NIODisplay
System or Nio display(s).
Driver and software installation prerequisites
Note: To install or remove the drivers, software, or
documentation you must be logged on as a user with
administrator privileges.
Your operating system must be installed and running before you can
install the driver, software and documentation for the display
controller(s) for your B
ARCO NIO Display System.
Before you begin make sure that all of your Nio display(s) are
connected to the appropriate display controller(s) in your system.
Installing drivers and software in Windows
This chapter is divided into two sections. The first section describes the
process for installing the drivers and software for the B
ARCO MXRT family
of controllers. The second section describes the process for installing the
drivers and software for the B
ARCOMED family of controllers.
Installing the BARCO MXRT drivers and software
Note: The installation dialog will display in English if your
operating system’s language is not supported.
This process applies to the following versions of Windows:
• Windows 2000 Professional,
• Windows XP Professional,
• Windows Professional x64 Edition,
• Windows Server 2003, and
• Windows Server 2003 x64 Edition.
You will need to install the Nio display system drivers and software in
the following cases:
To Next Page
Loading...
