Why does the image on my Barco PFWX-51B flash occasionally?
If the image flashes, make sure the connector and the input device have been properly connected. Also, check to see if the input device is in normal working order.
Why can't I turn on my Barco PFWX-51B right after turning it off?
Wait for the projector to cool down completely before starting it up again (the projector's STAND BY indicator will turn blue).
How to adjust brightness on Barco PFWX-51B Projector if image is washed out?
If the image appears washed out, the image brightness might be set too high. Lower the brightness settings.
Why does my Barco PFWX-51B Projector lamp suddenly turn off?
If the lamp suddenly goes off and the picture disappears, the lamp may be damaged or has reached the end of its service life. Please replace it.
What to do if my Barco PFWX-51B shows the menu but no picture?
If you see the menu but no picture, ensure that the projector is turned on properly and that you have selected the correct input source. Also, check the connection between the projector and the input device to make sure it is correctly connected.
How to fix a blurry image on my Barco Projector?
If the image is blurry, try adjusting the lens focus. If the temperature or humidity of the projector's environment has recently changed, turn off the projector and wait for any moisture inside to evaporate.
Why is the picture on my Barco PFWX-51B Projector so dim?
A dim picture often indicates that the projector lamp needs replacing. Replace the projector lamp.
How to fix a Barco PFWX-51B that won't turn on?
If your projector isn't turning on, first ensure that the power cord is securely plugged into a working wall outlet. Check that the AC socket is functional. Also, make sure the lens cover has been properly replaced.
Discusses general safety guidelines and product applicability.
Provides crucial instructions to prevent electrical shock and personal injury.
Details environmental conditions, cooling, and clean air requirements for installation.
Explains different mounting options like front/rear and table/ceiling configurations.
Provides a brief overview of the projector setup steps for table mount front projection.
Covers available projector lenses, how to remove existing, and install new lenses.
Instructions on how to safely connect the projector to the power source using provided cords.
Steps to correctly align the projector horizontally and vertically on a table.
Guide on how to mount the projector using a ceiling mount, including necessary tools.
Details all available input and communication ports for connecting external devices.
Illustrates how to connect various devices via HDMI, DVI-D, DisplayPort, etc.
Step-by-step guide on how to turn on the projector.
Instructions on how to safely turn off the projector and allow for cooling.
Details how to adjust the lens position using the shift levers for image alignment.
Steps to access the advanced menu, including password entry.
Function to automatically resync and adjust image size, phase, and timing.
Detailed procedure for replacing the projector lamp, including safety precautions.
Provides solutions for common projector problems and issues.
Lists detailed technical specifications for the PFWU-51B projector model.
Lists detailed technical specifications for the PFWX-51B projector model.
To Next Page
General
